如何延长铁合金炉衬的使用寿命
铁合金电炉炉衬的制作可采用碳块和冷夯膏两种材料,当炉衬尤其是冷夯膏炉衬达不到规定的要求,烘烤时炉衬时间和升温速度没有严格控制,炉衬的烘烤就达不到正常要求: 选择优质碳素材料 对于耐火碳块,通常要求灰分不高于 6%,挥发分不高于 0.6%,高压强度不低于 260kg/cm3。要求 1.2m 长的垂直碳块落地时不断裂。冷夯浆料应满足灰分不高于 8%,挥发分控制在 9.5%-10.5%,夯后体积密度不小于 1.9g/cm3。 筑炉时应特别注意 用碳砖做炉衬时,在筑炉过程中会挥发大量焦油和沥青,筑炉前应增加炉口的风机数量,以改善操作环境。每铺一层碳块后,最好进行预烘,温度保持在 90~110℃ 4~8…